Spectrophotometer PE-5300VI

The PE-5300VI spectrophotometer is designed to measure the transmittance and optical density of liquids in order to determine the components dissolved in them.

Where can I use the PE-5300VI spectrophotometer:

- Control of water quality (drinking, natural, wastewater) by photometric method: aluminum, ammonium, ammonia, boron, vanadium, bismuth, iron, cadmium, carbamide, cobalt, silicon, manganese, copper, methanol, molybdenum, turbidity, arsenic, nickel, nitrates, nitrites, tin, surfactants, rhodanides, mercury, lead, selenium, silver, sulfates, phenols, formaldehyde, phosphates, phosphorus, fluorides, COD, chromium (VI), chromaticity, cyanides, zinc, etc.;

- Control of the content of chemicals in the soil by photometric method:: total nitrogen, aluminum, ammonium, beryllium, boron, humus, iron, cobalt, magnesium, manganese, copper, molybdenum, arsenic, nitrates, organic matter, selenium, sulfates, volatile phenols, formaldehyde, phosphorus, zinc, sulfur and

- Control of the content of chemicals in the atmospheric air and emissions into the atmosphere by the photometric method:ammonia, manganese, nickel, formaldehyde, hydrogen fluoride, chlorine, chromium, etc.;

- Air control of the working area for compliance with occupational safety standards by photometric method;

- Measurement in food products by photometric method: iron, lactose, citric acid, copper, arsenic, nitrates, nitrites, nitrates, tin, sugar, sorbic acid, phosphorus, nickel, protein in milk, etc.;

- Measurement in alcoholic beverages by photometric method: aldehydes, iron, copper, methyl alcohol, sugar fusel oil, higher alcohols, color, complex esters, etc.;

- Measurement in feed, compound feeds by photometric method: iron, carotene, cobalt, manganese, copper, lead, carbohydrates, phosphorus, zinc;

- Determination of the concentration of lead and iron in gasoline by photometric method;

- Biochemical analyses, for example, such as determination of the content in the blood: transminase, hemoglobin, K+, Na+, thymol, bilirubin, etc.

Certificate of approval of the type of measuring instruments, recognition of the SI type in the CIS countries: Belarus, Kazakhstan, Ukraine

Registration certificate no. FSR 2010/07089.

Certificate of conformity No. ROSS RU.AG48.N10482.

Declaration of Conformity No.RU D-RU.MM04.V.01336.

The register of methods of quantitative chemical analysis and assessment of the state of environmental objects approved for state environmental control and monitoring (HDPE F).

Features:
- The warranty period is 36 months;
- Manual wavelength setting;
- Manual dark current compensation;
- PC software included with the ability to automatically update via the Internet:

a) Quantitative analysis (creation of graduations, automatic calculation of the square of the correlation coefficient of the calibration equation, the maximum value of the standard deviation of the calculated value as a percentage and the maximum error of the calculated value as a percentage for all standard samples, saving graduations, performing measurements based on saved graduations, automatic setting of the wavelength on the device when selecting the saved calibration, during the execution The measurement concentration is automatically calculated for each sample, as well as the average concentration value and percentage convergence for parallel measurements, saving the received data, printing the protocol in the GLP standard);

b) Kinetic analysis (change in optical density over a given period of time);

c) Data entry in Excel;

- The ability to quickly monitor the measurement result using a set of four control light filters;

- The optical density value does not depend on the position of the cuvette in the cuvette holder;

- The possibility of using cuvettes with a small wedge shape;

- For the convenience of the user, it is possible to arrange the cuvettes in a staggered manner without deterioration of metrological characteristics;

- Increased accuracy and stability of measurement results compared to common analogues;

- The ability to measure with high accuracy the optical density of liquids in vials and test tubes (with an additional holder);

- The PE-5300VI spectrophotometer surpasses analogues of UNICO 1200 (1201), LEKI SS1104, PE-5300V, KFK-3 in a number of metrological and operational characteristics.

Technical specifications:
- Spectral range: 325-1000 nm;
- Spectral slit width: 4 nm;
- Wavelength setting error, not more than: ± 2 nm;
- Reproducibility of the wavelength setting, no more than 1 nm;
- The limits of the permissible absolute error in measuring the spectral coefficients of directional transmission, not more than: ± 0.5%T;
- Measuring range:
a) Optical density: from 3,000 to 0.000;
b) directional transmission coefficient: from 0.0 to 100.0%.
- Light source: Halogen lamp;
- Digital output for PC connection: USB B;
- Overall dimensions (LxWxH) mm: 440x320x175;
- Weight: not more than 8.5 kg;
- Power consumption: 25W;
- Supply voltage: 220 ± 22 V, at a frequency of 50 Hz.

Transport data/dimensions/weight:
1 box, 550 x 440 x 300 mm., 10.3 kg.   A crate is required!

Basic equipment:
- A device with a holder for 3 cuvettes 24 mm wide (KFC standard) up to 100 mm long - 1 pc.;
- Software - 1 pc.;
- Control light filters - 4 pcs. in a case;
- Glass cuvette KFK 10x24 mm - 4 pcs. in a case;
- Adapter-plug - 3 pcs.;
- Dust cover;
- USB A - USB B cable for connecting to a PC - 1 pc.;
- Spare halogen lamp - 1 pc.;
- Passport and operating manual with a copy of the verification procedure - 1 pc.